admin
Grouting is necessary for any tile installation to provide both aesthetic and functional benefits. It fills in the gaps between tiles, preventing water and dirt from seeping through and adding a finishing touch to your tiles. If you have recently installed new tiles or are planning to do so, this step-by-step guide will help you learn how to grout your tiles like a pro!
Gather your tools and materials:
Before you start, ensure you have all the necessary tools and materials on hand. You’ll need grout, a grout float, a sponge, a bucket of warm water, a grout sealer, a mixing tool, and a tile spacer (if not already used). Choose a grout that matches the type of tiles in UAE you’re working with, such as cement-based or epoxy grout, and consider the color that complements your design.
Mix the grout:
In a clean bucket, combine the grout powder with the recommended amount of water. Use a mixing tool or a trowel to blend the grout until it reaches a smooth, peanut butter-like consistency. Ensure not to make too much grout at once, as it can start to dry before you can apply it. If necessary, mix smaller batches to avoid wasting grout.
Apply the grout:
Using a grout float, scoop up some grout and hold it at a 45-degree angle to the surface of the tiles. Spread the grout over the tiles, working in small sections. Press the grout into the gaps between the tiles, ensuring the spaces are fully filled. Move the float diagonally across the tiles to remove any excess grout and prevent it from accumulating on the surface.
Wipe off excess grout:
Once the grout has been applied, it’s time to clean off any excess. Dampen a sponge with water and wring it out so it’s not too wet. Gently wipe the surface of the tiles in a circular motion, being careful not to pull grout out of the joints. Continue to wipe the tiles until most of the excess grout has been removed. Ensure to rinse the sponge frequently to avoid spreading grout back onto the tiles.
Allow the grout to set:
After wiping off the excess grout, leave it to set for 10-15 minutes, depending on the manufacturer’s instructions. This will allow the grout to firm up and hold its shape while also helping to remove any haze left on the tile surface. Once the grout has set, use a clean, damp cloth to wipe down the tiles and remove any remaining grout haze.
